For the purposes of these Terms and Conditions of Sale, the term "contract" shall mean the agreement between Nfina Technologies Corporation ("Supplier") and Buyer arising as a result of Buyer's submission of an order for Supplier's products ("Products"). Such contract shall be deemed to incorporate and be governed by these Terms and Conditions. THESE TERMS AND CONDITIONS SHALL TAKE PRECEDENCE OVER ANY TERMS AND CONDITIONS WHICH APPEAR IN BUYER'S ORDER OR IN ANY DOCUMENTS INCORPORATED BY REFERENCE IN BUYER'S ORDER. No term or condition of Buyer's order additional to or different from these Terms and Conditions shall become part of the contract unless explicitly agreed to in writing by Supplier. Retention by Buyer of any Products delivered by Supplier, or payment by Buyer of any invoice rendered hereunder, shall be conclusively deemed acceptance of these Terms and Conditions. Supplier's failure to object to any provision contained in any communication from Buyer shall not be construed as a waiver of these Terms and Conditions nor as an acceptance of any such provision.
1. Quotations: Prices, specifications and dates for delivery referenced in Supplier's quotations are for information purposes only and shall not be binding on Supplier until Supplier has accepted and acknowledged Buyer's order. Quotations terminate if not accepted by Buyer within 24 hours. All descriptions, illustrations and any other information relating to the Products contained in the Supplier's catalogues, brochures, price lists, advertising material and any sales or other particulars or literature are made by way of general description, are approximate only and for the general guidance and information of the Buyer. They shall not constitute warranties or representations by the Supplier nor shall they form part of any contract.
2. Orders: By submitting an order to Supplier, Buyer agrees to be subject to these Terms and Conditions of Sale in their entirety. All orders must be bona fide commitments showing definite prices and quantities and mutually agreed shipping dates. No order, whether or not submitted in response to a quotation by Supplier, shall be binding upon Supplier until accepted in writing by Supplier.
3. Prices and Taxes: Prices do not include federal, state or local taxes, including without limitation sales, use or excise taxes now or hereafter enacted, applicable to the Products sold in this transaction, which taxes may, in Supplier's discretion, be added by Supplier to the sales price or billed separately and which taxes shall be paid by Buyer unless Buyer provides Supplier with any necessary tax exemption certificate.
4. Shipment and Delivery: In the absence of specific instructions, all Products will be shipped F.O.B. Supplier's premises and may be so shipped in several lots. Supplier will select the carrier and ship "collect", but shall not be deemed thereby to assume any liability in connection with the shipment nor shall the carrier be construed to be the agent of Supplier. Buyer must provide its own insurance. Title and risk of loss or damage to all Products sold hereunder shall pass from Supplier to Buyer upon delivery by Supplier to the possession of the carrier, provided that Supplier reserves a purchase money security interest in the Products. Any claims for loss, damage or miss-delivery thereafter shall be filed with the carrier. All Products shall be deemed finally inspected and accepted within ten days after delivery unless notice of rejection is given in writing to Supplier within such period. Acceptance shall constitute acknowledgment of full performance by Supplier of all obligations under the contract except as stated at Section 11 (Warranties).
5. Terms of Payment: Each shipment shall be a separate transaction and Buyer will be invoiced on date of dispatch. Unless otherwise stated on Supplier's invoice, terms of payment shall be net thirty (30) days from date of invoice. All invoiced amounts must be paid in full without deduction, withholding, setoff or counterclaim of any kind. Supplier may, in its sole discretion require payment in advance, and, if such requirement is not met, may cancel the order or any part thereof and receive reasonable cancellation fees. If Buyer fails to pay any payment due hereunder when due, Supplier may recover, in addition to the payment, interest thereon at the rate of 1 1/2% per month where lawful, otherwise the maximum lawful monthly interest rate, and reasonable attorney's fees.
6. Credits and Returns: Products may only be returned to Supplier after obtaining a return authorization. Credit for return of Products is at the sole discretion of the Supplier and a minimum restocking fee of 25-50% will be charged. Determination of cause and liability for defective Products returned rests solely with the Supplier.
7. Security Interest: Buyer hereby grants to Supplier a security interest in all Supplier Products sold to Buyer as security for the due and punctual performance by Buyer of all of its obligations hereunder. Buyer agrees to execute such documents to evidence and perfect said security interest as Supplier may require, including without limitation financing statements on Form UCC-1.
8. Contingencies: Supplier shall not be liable for any delay in delivery or for non-delivery, in whole or in part, caused by the occurrence of any contingency beyond the control of Supplier, including, by way of illustration but not limitation, war (whether an actual declaration thereof is made or not), sabotage, insurrection, riot or other act of civil disobedience, act of a public enemy, failure or delay in transportation, act of any government or any agency or subdivision thereof, judicial action, labor dispute, accident, fire, explosion, floods, storm or other act of God, shortage of labor, fuel, raw material or machinery or technical failure where Supplier has exercised ordinary care in the prevention thereof. If any such contingency occurs, Supplier may allocate production and deliveries among Supplier's customers.
9. Product Changes: Supplier may modify specifications provided the modifications do not adversely affect the performance of the Products to be supplied under the contract. In addition, Supplier may furnish suitable substitutes for material based on compatibility, or because materials are unobtainable because of priorities or regulations established by government authority, or no availability of materials from suppliers.
10. Software: Supplier shall at all times have and retain title and full ownership of all software, firmware programming routines, and documentation thereof supplied by Supplier for use with the Products, and of all copies thereof made by Buyer (collectively "software"). Supplier grants Buyer a non-exclusive and non-transferable license to use such software solely for use with the Products. Buyer shall take all reasonable steps to protect Supplier's proprietary interest in the software and shall not transfer or otherwise provide the software to any third party. All intellectual property rights owned by Supplier are reserved.
11. Product Warranties; Limitations; Exclusions:
A. Supplier warrants that all Products shall be free from defects in material and workmanship under normal use for the period of time provided in "Statement of Warranty Periods" current at the time of shipment of the Products. Supplier warrants hardware only; chassis, CPU, motherboard, hard drive, PSU, RAID card, I/O module, and excludes peripherals such as graphics card, monitor, keyboard, mouse, etc. Supplier does not warrant that operation of the Software will be completely uninterrupted or error free or that all program errors will be corrected. Buyer shall be responsible for determining that a Product is suitable for Buyer's use and that such use complies with any applicable local, state or federal law. Provided that Buyer notifies Supplier in writing of any claimed defect in the Products immediately upon discovery and any such Products are returned to the original shipping point, transportation charges prepaid by the buyer, within the relevant warranty period and upon examination Supplier determines to its satisfaction that such Products are defective in material or workmanship Supplier shall at its option repair or replace the Products, shipment to Buyer prepaid by the supplier. Supplier shall have reasonable time to make such repairs or to replace such Products. Any repair or replacement of Products shall not extend the warranty period.
This warranty is limited to the period of time stated in the "Statement of Warranty Periods", without regard to whether any claimed defects were discoverable or latent on the date of shipment. The warranty covers only defects arising out of the manufacture of the Products and not defect caused by other circumstances, including, but not limited to accident, misuse, unforeseeable use, neglect, alteration, improper installation, improper adjustment, improper repair, improper testing, power surges or failure to install and configure UPS for graceful shutdown. If it is determined that the product is defective due to other circumstances, we will (at our option) will quote a repair or replacement price. In addition and without limiting the foregoing, Suppler shall not be responsible for any Buyer custom software or firmware, configuration information, or memory data contained in, stored on, or integrated with any products returned to Supplier pursuant to this warranty.
In addition to our 5 year limited warranty, Nfina Technologies tech support is available 24 hours a day / 7 days a week (24x7) . Standard Support (Nfina-S) includes a 5 year limited warranty, tech support with remote diagnostics 24x7. Gold Support (Nfina-G) is a next business day (NBD) response support package, including a 5 year limited warranty, tech support 24x7, NBD on-site response, advanced hardware replacement*. Platinum Support (Nfina-P) is an urgent response support package, including a 5 year limited warranty, 24x7 tech support with guaranteed 4 hour response, 4 hour on-site response, and advanced hardware replacement*.
* Nfina Technologies customer service department must be contacted for a RMA number before proceeding with an advanced replacement, repair, or return. No items will be accepted without a RMA number. Advanced replacement available on select components.
B. Supplier warrants that all SSDs shall be free from defect in material and workmanship under normal use for the period of time provided in the "Statement of Warranty Periods" at time of shipment of the products or by the SSD device expiration as indicated by the device life indicator: TBW (Total bytes written) threshold, whichever comes first.
C. If Buyer shall fail to pay when due any portion of the purchase price or any other payment required from Buyer to Supplier under this contract or otherwise, all warranties and remedies granted under this Section 11 may, at Supplier's option, be terminated.
D. THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER REPRESENTATIONS, WARRANTIES AND COVENANTS, EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCTS AND ANY DEFECTS THEREIN OF ANY NATURE WHATEVER, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SUPPLIER SHALL NOT BE LIABLE FOR, AND BUYER ASSUMES ALL RISK OF, ANY ADVICE OR FAILURE TO PROVIDE ADVICE BY SUPPLIER TO BUYER REGARDING THE PRODUCTS OR BUYER'S USE OF THE SAME. UNDER NO CIRCUMSTANCES SHALL SUPPLIER BE LIABLE TO BUYER UNDER ANY TORT, NEGLIGENCE, STRICT LIABILITY, OR PRODUCT LIABILITY CLAIM AND BUYER AGREES TO WAIVE SUCH CLAIMS. SUPPLIER'S SOLE AND EXCLUSIVE LIABILITY, AND BUYER'S SOLE AND EXCLUSIVE REMEDY, FOR ANY NONCONFORMITY OR DEFECT IN THE PRODUCTS OR ANYTHING DONE IN CONNECTION WITH THIS CONTRACT, IN TORT (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL BE AS SET FORTH IN SUBSECTION 11A HEREOF AS LIMITED BY SUBSECTION 11B HEREOF. THIS EXCLUSIVE REMEDY SHALL NOT HAVE FAILED OF ITS ESSENTIAL PURPOSE (AS THAT TERM IS USED IN THE UNIFORM COMMERCIAL CODE) PROVIDED THAT THE SUPPLIER REMAINS WILLING TO REPAIR OR REPLACE DEFECTIVE PRODUCTS (AS DEFINED IN SUBSECTION 11A) WITHIN A COMMERCIALLY REASONABLE TIME AFTER RECEIVING SUCH PRODUCTS. BUYER SPECIFICALLY ACKNOWLEDGES THAT SUPPLIER'S PRICE FOR THE PRODUCTS IS BASED UPON THE LIMITATIONS OF SUPPLIER'S LIABILITY AS SET FORTH IN THIS CONTRACT.
12. Patents: Supplier shall defend any suit or proceeding brought against Buyer to the extent that it is based on a claim that any Products manufactured by Supplier infringe in construction or design a United States patent, and shall indemnify Buyer against all costs, damages and expenses finally awarded against Buyer provided that Buyer notifies Supplier promptly in writing of any such claim and gives Supplier full and complete authority, information and assistance for the defense of such claim and provided further that Supplier shall have sole control of the defense and of the negotiations for settlement, if any, of such claim. If any such Products is held in construction or design directly to infringe any United States patent and the use of said Products is enjoined, or in case any Products may, in the opinion of Supplier, be held to infringe, Supplier may, at its expense and option, either (a) procure for Buyer the right to continue using said Products, (b) replace said components of Products with a suitable non-infringing product, (c) suitably modify said Products, or (d) refund the purchase price of said Products, less depreciation at twenty percent (20%) per year, and accept its return. Supplier shall not be liable for any cost or expense incurred without Supplier's written authorization. Supplier shall not be obligated to defend or be liable for costs and damages if the infringement arises out of compliance with Buyer's specification or from a combination with or an addition to Products not manufactured or developed by Supplier or a modification of the Products after delivery or the use of Products beyond that established by Supplier or approved in writing by Supplier. THE FOREGOING STATES THE ENTIRE LIABILITY OF SUPPLIER, AND THE EXCLUSIVE REMEDY OF BUYER, WITH RESPECT TO ANY ALLEGED PATENT INFRINGEMENT BY THE SAID EQUIPMENT.
13. Limitation of Liability and Buyer Indemnity: IN NO EVENT, REGARDLESS OF THE FORM OF ACTION, SHALL SUPPLIER BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL LOSSES OR DAMAGES ARISING OUT OF THE SALE OF ITS PRODUCTS TO BUYER OR ARISING OUT OF ANYTHING DONE IN CONNECTION WITH THE CONTRACT, INCLUDING, BUT NOT LIMITED TO, LOSSES OR DAMAGES ARISING OUT OF CLAIMS FOR LOSS OF USE, BUSINESS, GOODWILL, OR PROFITS, AND CLAIMS ARISING OUT OF THIRD PARTY ACTIONS, REGARDLESS OF WHETHER SUCH THIRD PARTY ACTIONS, OR ANY OTHER CLAIMS, LOSSES, OR DAMAGES, WERE REASONABLY FORESEEABLE TO BUYER OR SUPPLIER. BUYER'S EXCLUSIVE REMEDY ARISING OUT OF ITS PURCHASE AND USE OF SUPPLIER'S PRODUCTS, OR ARISING OUT OF ANYTHING DONE IN CONNECTION WITH THE CONTRACT, SHALL BE FOR DAMAGES AND NO CLAIM OR CLAIMS OF ANY KIND, WHETHER BASED UPON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, NEGLIGENCE, WARRANTY AND STRICT LIABILITY), STATUTORY OR REGULATORY PROVISIONS, INDEMNITY, CONTRIBUTION, OR OTHERWISE, SHALL BE GREATER IN AMOUNT IN AGGREGATE THAN THE PURCHASE PRICE OF THE PRODUCTS IN RESPECT OF WHICH DAMAGES ARE CLAIMED.
Buyer shall indemnify and hold harmless Supplier, its officers, agents, employees, subsidiaries, parents, affiliates and insurers from and against any and all liabilities, damages, losses, claims, lawsuits, including costs and expenses in connection therewith, for death or injury to any persons or loss of any property whatsoever, caused in any manner by Buyer's possession, use or operation of Products.
14. Proprietary Information: Buyer represents that it has adopted reasonable procedures to protect Proprietary Information, as defined hereafter, including binding agreements with employees and consultants to prevent unauthorized publication, disclosure or use of such during or after the term of their employment by or services for Buyer. Buyer shall not use Proprietary Information except as required for the use of the Products, shall not disclose Proprietary Information to any third party, and shall not transmit any documents or copies thereof containing Proprietary Information to any third party, except as may be authorized in writing by Supplier. This Section 14 shall survive termination of the contract. "Proprietary Information" shall mean information or data of Supplier, or a third person to whom Supplier owes obligations of confidentiality, and which is furnished or to be furnished to Buyer in written, graphic or machine-readable form and is marked proprietary or confidential. Where copies or alternative forms of information or data are received from Supplier, such information or data shall be considered Proprietary Information if at least one of said copies or alternative forms is marked proprietary or confidential. This Section 14 shall not apply to information which Buyer demonstrates was rightfully in Buyer's possession without any obligation to protect the confidentiality thereof prior to receipt from Supplier or information which Buyer demonstrates is or has become available to the public or general knowledge in the industry otherwise than through the fault of Buyer.
15. Rescheduling and Cancellation: Orders accepted by Supplier may be cancelled or rescheduled by Buyer only with the written consent of Supplier (which consent Supplier may withhold for any reason) and upon payment of Supplier's then-current cancellation or rescheduling charges. Supplier shall have the right without penalty or payment to cancel any order accepted (i) if Buyer fails to make any payment when due to Supplier under the contract or any other contract (ii) if any act or omission of Buyer delays Supplier's performance, or (iii) if Buyer violates any of these Terms and Conditions and in the event of such cancellation Supplier shall be entitled to receive reimbursement for its reasonable and proper cancellation charges.
16. Non-Waiver; Remedies: No waiver of any breach of these Terms and Conditions shall constitute a waiver of any prior or subsequent breach of any similar or dissimilar provision or a modification of the contract. All Supplier rights and remedies, whether evidenced hereby or by any other contract or document, shall be cumulative and nonexclusive and may be exercised singularly or concurrently.
17. Applicable Law and Actions to Recover Damages: The validity, performance and construction of the contract shall be governed by the laws of the State of Alabama without regard to its conflicts of law principles. The United Nations Convention on the International Sale of Goods (CISG) shall not apply to the contract. If any provision of these Terms and Conditions is held to be unenforceable, such holding shall not affect the enforceability of any other provision. Any legal presumption that terms in this contract shall be strictly construed against the party who drafted such terms or who benefits from such terms shall not be employed in construing and interpreting this contract. Prior to commencement of any legal proceedings, Buyer and Supplier shall meet at a senior level to attempt to resolve differences. Notwithstanding any attempts to resolve differences or negotiations regarding such differences, any action brought by Buyer against Supplier arising out of this contract or Buyer's purchase and use of the Products must be commenced within one year after such action accrues and in no event later than two years after date of shipment of such Products.
18. Government Contracts: If the Products to be furnished under the contract are to be supplied to the U.S. Government in the performance of a U.S. Government contract or subcontract, the Government contract number and a statement to that effect shall appear on Buyer's purchase order. If Buyer's purchase order includes all of said information and if said order is accepted in writing by Supplier, then those clauses of the Federal Acquisition Regulations (FAR) and the Defense Federal Acquisition Regulation supplements (DFARs) which by statute, Executive Order or Agency regulation must be included in a contract for the purchase of Commercial Items shall be incorporated herein by reference. In all other events, said clauses shall not be incorporated herein by reference.
19. Export: Regardless of any disclosure made by Buyer to Supplier of the ultimate destination of Supplier Products, Buyer shall not export either directly or indirectly any Supplier product, or any system incorporating said product either in contravention of statute or regulation or without first obtaining all required licenses and permits from the United States Department of Commerce and any other relevant agencies or departments of the United States government.
20. Assignment: The contract shall be binding upon and inure to the benefit of the parties and their respective legal representatives, successors and permitted assigns. The contract is personal to Buyer, and Buyer may not assign any of its rights or delegate any of its obligations thereunder, in whole or in part, without the prior written consent of Supplier which may be withheld for any reason.
21. Complete Agreement; Modifications: This contract constitutes the entire agreement between the parties relating to the sale of the Products and no addition to or modification of any provision of said agreement shall be binding upon Supplier unless agreed in writing by Supplier.
22. Notices: All notices given under the contract shall be in writing, mailed by first class mail, certified or registered, or delivered by hand to the address of the other party set forth in the quotation or to such other address as such party may designate from time to time by such notice, and shall take effect when received.
Nfina Technologies Inc.
820 South University Blvd., Suite 4E
Mobile, AL 36609